isep-doctor 判準改成「每一個 Claude Code 自己回報有沒有載入」，不再看設定長相（inkstone/ISEP#150 → c6995）
同一台 Mac 有 CLI 與 Desktop 內建兩個 Claude Code，讀同一份 ~/.claude 卻不一定同結論： settings 多了 path 時 Desktop 2.1.266 忽略 inkstone marketplace、CLI 2.1.220 照常載入（c6991）。 第一版看到 path 就對整台判 ❌，在 CLI 上是假陽性。 - 逐一找 CLI（PATH）與 Desktop（最新版本，數字排序），各跑 plugin list --json，依 errors 各判各的 - 設定比對只在某一個真的報錯時當解釋＋修法，永遠不單獨判 ❌ - 查不了 ⇒ ◐、離開碼 2，不講成 ✅ 或 ❌ - test-isep-doctor.sh 離線 11 條（假 claude 可執行檔）；舊版跑這份 pass=1 fail=10 - test-isep-doctor-live.sh 實機 3 條：真的 CLI 2.1.220／Desktop 2.1.266，隔離 HOME 重現有／無 path，不動 ~/.claude - 盤點表與 plugin.json 描述的腳本數 62→65（這棵樹上實數） 版本號待總管定。 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
+108
-58
@@ -1,28 +1,38 @@
|
||||
#!/usr/bin/env python3
|
||||
"""isep-doctor — 這台機器的 Claude Code 到底有沒有把 ISEP 載進來（inkstone/ISEP#150）
|
||||
"""isep-doctor — 這台機器上每一個 Claude Code，到底有沒有把 ISEP 載進來（inkstone/ISEP#150）
|
||||
|
||||
為什麼要有這支：
|
||||
plugin 載入失敗時，ISEP 的 59 支閘**一支都不會跑**，而且**沒有任何閘能講出來**——
|
||||
plugin 載入失敗時，ISEP 的閘**一支都不會跑**，而且**沒有任何閘能講出來**——
|
||||
講話的 isep-presence-beacon 本身就在那個沒載入的 plugin 裡。
|
||||
2026-09-05 起 `~/.claude/settings.json` 的 `extraKnownMarketplaces.inkstone.source`
|
||||
多了一個 `path`（本機 checkout 路徑），Claude Code 把它當成 git 來源的抓取欄位
|
||||
（debug log：「its network source differs from the one declared for it in settings
|
||||
(… path …)」），整個 marketplace 被忽略 ⇒ `isep@inkstone` 報 "Marketplace inkstone not found"。
|
||||
CLI 與 Desktop 同病，當時被誤判成「Desktop 不跑 hook」。
|
||||
|
||||
判準（狀態，不是措辭）：
|
||||
① `claude plugin list --json` 裡 isep@inkstone 帶 errors ⇒ ❌
|
||||
② settings 對 inkstone 的宣告，比 known_marketplaces.json 記的多了抓取欄位 ⇒ 指出是哪一個、給修法
|
||||
都沒有 ⇒ ✅，離開碼 0
|
||||
為什麼一台機器要分開問（09-13 總管複驗 c6991 推翻了第一版）：
|
||||
同一台 Mac 上有**不只一個** Claude Code：CLI（例：/opt/homebrew/bin/claude 2.1.220）
|
||||
與 Claude Desktop 內建的那一份（~/Library/Application Support/Claude/claude-code/<版本>/…，例：2.1.266）。
|
||||
它們讀同一份 ~/.claude，**卻不一定得出同一個結論**：
|
||||
settings.json 的 extraKnownMarketplaces.inkstone.source 多了 path 時——
|
||||
2.1.266：整個 marketplace 被忽略 ⇒ isep@inkstone 報 "Marketplace inkstone not found"
|
||||
2.1.220：照常載入
|
||||
第一版只看「設定長得像會出事」就對整台機器判 ❌，在 2.1.220 上是假陽性。
|
||||
|
||||
離開碼：0 通｜1 沒載入（附原因與一行修法）｜2 查不了（找不到 claude 可執行檔等）
|
||||
判準（實際狀態，不是設定長相）：
|
||||
對每一個找得到的 Claude Code 各跑一次 `plugin list --json`，看它**自己**回報的 isep@inkstone：
|
||||
沒有這一筆 ⇒ ❌ 沒安裝
|
||||
帶 errors ⇒ ❌ 沒載入（照實轉述；若 settings 比已安裝的 marketplace 多了抓取欄位，附上原因與修法）
|
||||
沒有 errors ⇒ ✅（即使設定裡有 path——那台實際載得進來就是載得進來）
|
||||
跑不動／看不懂 ⇒ ◐ 查不了（讀不到不等於沒載入，也不等於有）
|
||||
設定比對**只當解釋**，永遠不單獨判 ❌。
|
||||
|
||||
測試用環境變數：ISEP_DOCTOR_PLUGIN_LIST_JSON（直接給 plugin list 的輸出檔）、
|
||||
ISEP_DOCTOR_CLAUDE_HOME（代替 ~/.claude）。迴歸測試：scripts/test-isep-doctor.sh
|
||||
離開碼：0 全部 ✅｜1 至少一個 ❌｜2 沒有 ❌、但至少一個查不了（或一個 Claude Code 都找不到）
|
||||
|
||||
測試用環境變數：
|
||||
ISEP_DOCTOR_CLAUDE_BINS 用這份清單取代自動尋找；以 os.pathsep 分隔，每項 `名稱=可執行檔路徑`
|
||||
ISEP_DOCTOR_CLAUDE_HOME 代替 ~/.claude
|
||||
迴歸測試：scripts/test-isep-doctor.sh（離線）／scripts/test-isep-doctor-live.sh（真的 Claude Code、隔離 HOME）
|
||||
"""
|
||||
import glob
|
||||
import json
|
||||
import os
|
||||
import re
|
||||
import shutil
|
||||
import subprocess
|
||||
import sys
|
||||
@@ -30,73 +40,113 @@ import sys
|
||||
PLUGIN_ID = "isep@inkstone"
|
||||
MARKET = "inkstone"
|
||||
FETCH_FIELDS = ("path", "ref", "headers", "sparsePaths")
|
||||
DESKTOP_GLOB = "~/Library/Application Support/Claude/claude-code/*/claude.app/Contents/MacOS/claude"
|
||||
|
||||
home = os.environ.get("ISEP_DOCTOR_CLAUDE_HOME") or os.path.expanduser("~/.claude")
|
||||
|
||||
|
||||
def find_claude():
|
||||
c = shutil.which("claude")
|
||||
if c:
|
||||
return c
|
||||
cands = sorted(glob.glob(os.path.expanduser(
|
||||
"~/Library/Application Support/Claude/claude-code/*/claude.app/Contents/MacOS/claude")))
|
||||
return cands[-1] if cands else None
|
||||
def _ver_key(path):
|
||||
m = re.search(r"/claude-code/([0-9][0-9.]*)/", path)
|
||||
return tuple(int(x) for x in m.group(1).split(".") if x) if m else ()
|
||||
|
||||
|
||||
def plugin_list():
|
||||
f = os.environ.get("ISEP_DOCTOR_PLUGIN_LIST_JSON")
|
||||
if f:
|
||||
return json.load(open(f))
|
||||
exe = find_claude()
|
||||
if not exe:
|
||||
return None
|
||||
out = subprocess.run([exe, "plugin", "list", "--json"], capture_output=True, text=True, timeout=60)
|
||||
return json.loads(out.stdout)
|
||||
def find_claudes():
|
||||
"""回傳 [(名稱, 路徑)]。Desktop 只取最新版本那一份（它啟動的就是那一份；舊資料夾可能殘留）。"""
|
||||
env = os.environ.get("ISEP_DOCTOR_CLAUDE_BINS")
|
||||
if env is not None:
|
||||
out = []
|
||||
for item in env.split(os.pathsep):
|
||||
if "=" in item:
|
||||
name, path = item.split("=", 1)
|
||||
out.append((name, path))
|
||||
return out
|
||||
out = []
|
||||
cli = shutil.which("claude")
|
||||
if cli:
|
||||
out.append(("CLI", cli))
|
||||
desk = sorted(glob.glob(os.path.expanduser(DESKTOP_GLOB)), key=_ver_key) # 數字排序：2.1.99 < 2.1.266
|
||||
if desk:
|
||||
out.append(("Desktop", desk[-1]))
|
||||
return out
|
||||
|
||||
|
||||
def version_of(exe):
|
||||
try:
|
||||
r = subprocess.run([exe, "--version"], capture_output=True, text=True, timeout=30)
|
||||
return (r.stdout.strip().split() or ["?"])[0]
|
||||
except Exception: # noqa: BLE001
|
||||
return "?"
|
||||
|
||||
|
||||
def ask(exe):
|
||||
"""回傳 (狀態, 內容)。狀態：'list' 內容＝plugin list 陣列；'err' 內容＝查不了的原因。"""
|
||||
try:
|
||||
r = subprocess.run([exe, "plugin", "list", "--json"], capture_output=True, text=True, timeout=90)
|
||||
except Exception as e: # noqa: BLE001
|
||||
return "err", f"執行失敗（{e}）"
|
||||
try:
|
||||
data = json.loads(r.stdout)
|
||||
if not isinstance(data, list):
|
||||
raise ValueError("不是陣列")
|
||||
return "list", data
|
||||
except Exception: # noqa: BLE001
|
||||
tail = (r.stdout or r.stderr or "").strip().splitlines()[-1:] or ["（沒有輸出）"]
|
||||
return "err", f"plugin list --json 看不懂（exit={r.returncode}：{tail[0][:200]}）"
|
||||
|
||||
|
||||
def load(p):
|
||||
try:
|
||||
return json.load(open(p))
|
||||
except Exception:
|
||||
except Exception: # noqa: BLE001
|
||||
return {}
|
||||
|
||||
|
||||
try:
|
||||
plugins = plugin_list()
|
||||
except Exception as e: # noqa: BLE001
|
||||
print(f"◐ 查不了：claude plugin list 失敗（{e}）")
|
||||
sys.exit(2)
|
||||
if plugins is None:
|
||||
print("◐ 查不了：找不到 claude 可執行檔")
|
||||
sys.exit(2)
|
||||
|
||||
entry = next((p for p in plugins if p.get("id") == PLUGIN_ID), None)
|
||||
declared = (load(os.path.join(home, "settings.json")).get("extraKnownMarketplaces") or {}).get(MARKET, {}).get("source")
|
||||
known = (load(os.path.join(home, "plugins", "known_marketplaces.json")).get(MARKET) or {}).get("source")
|
||||
|
||||
extra = []
|
||||
if isinstance(declared, dict):
|
||||
extra = [k for k in FETCH_FIELDS if k in declared and (not isinstance(known, dict) or declared.get(k) != known.get(k))]
|
||||
|
||||
if entry is None:
|
||||
print(f"❌ {PLUGIN_ID} 沒有安裝（這台的閘全部不存在）")
|
||||
print(" 修法：claude plugin marketplace add https://git.uncle6.me/inkstone/ISEP.git && claude plugin install isep@inkstone")
|
||||
sys.exit(1)
|
||||
claudes = find_claudes()
|
||||
if not claudes:
|
||||
print("◐ 查不了：這台找不到任何 Claude Code 可執行檔（CLI 與 Desktop 都沒有）")
|
||||
sys.exit(2)
|
||||
|
||||
errors = entry.get("errors") or []
|
||||
if not errors and not extra:
|
||||
print(f"✅ {PLUGIN_ID} {entry.get('version')} 已載入（enabled={entry.get('enabled')}）")
|
||||
sys.exit(0)
|
||||
bad, unknown, extra_hit = [], [], False
|
||||
for name, exe in claudes:
|
||||
label = f"{name} {version_of(exe)}"
|
||||
state, data = ask(exe)
|
||||
if state == "err":
|
||||
unknown.append(name)
|
||||
print(f"◐ {label}：查不了——{data}（讀不到不等於沒載入）")
|
||||
print(f" {exe}")
|
||||
continue
|
||||
entry = next((p for p in data if p.get("id") == PLUGIN_ID), None)
|
||||
if entry is None:
|
||||
bad.append(name)
|
||||
print(f"❌ {label}：{PLUGIN_ID} 沒有安裝——用這個 Claude Code 開的 session 一支 ISEP 閘都沒有")
|
||||
print(" 修法：claude plugin marketplace add https://git.uncle6.me/inkstone/ISEP.git && claude plugin install isep@inkstone")
|
||||
continue
|
||||
errors = entry.get("errors") or []
|
||||
if not errors:
|
||||
print(f"✅ {label}：{PLUGIN_ID} {entry.get('version')} 已載入（enabled={entry.get('enabled')}）")
|
||||
continue
|
||||
bad.append(name)
|
||||
print(f"❌ {label}：{PLUGIN_ID} {entry.get('version')} 沒有載入——用這個 Claude Code 開的 session 一支 ISEP 閘都沒有")
|
||||
for e in errors:
|
||||
print(f" Claude Code 回報：{e}")
|
||||
if extra:
|
||||
extra_hit = True
|
||||
print(f" 可能原因：~/.claude/settings.json 的 extraKnownMarketplaces.{MARKET}.source 多了 {', '.join(extra)}，"
|
||||
"這一版把它當 git 抓取欄位，跟已安裝的 marketplace 對不上，整個 marketplace 被忽略")
|
||||
|
||||
print(f"❌ {PLUGIN_ID} {entry.get('version')} 沒有載入——這台 Claude Code（CLI 與 Desktop 都一樣）一支 ISEP 閘都不會跑")
|
||||
for e in errors:
|
||||
print(f" Claude Code 回報：{e}")
|
||||
if extra:
|
||||
print(f" 原因：~/.claude/settings.json 的 extraKnownMarketplaces.{MARKET}.source 多了 {', '.join(extra)}，"
|
||||
"Claude Code 把它當 git 抓取欄位，跟已安裝的 marketplace 對不上，整個 marketplace 被忽略")
|
||||
if extra_hit:
|
||||
fields = ", ".join(repr(k) for k in extra)
|
||||
print(" 修法（一行，改完重開 Claude Desktop／CLI session）：")
|
||||
print("修法（一行，只拿掉上面點名的欄位；改完完全關掉 Claude Desktop／重開 CLI session 再跑一次本指令）：")
|
||||
print(f" python3 -c \"import json,os;p=os.path.expanduser('~/.claude/settings.json');d=json.load(open(p));"
|
||||
f"s=d['extraKnownMarketplaces']['{MARKET}']['source'];[s.pop(k,None) for k in ({fields},)];"
|
||||
"json.dump(d,open(p,'w'),ensure_ascii=False,indent=2)\"")
|
||||
sys.exit(1)
|
||||
|
||||
if bad:
|
||||
sys.exit(1)
|
||||
sys.exit(2 if unknown else 0)
|
||||
|
||||
Executable
+64
@@ -0,0 +1,64 @@
|
||||
#!/usr/bin/env bash
|
||||
# 實測：scripts/isep-doctor 對**真的** Claude Code（這台的 CLI 與 Desktop 內建那一份）判得對不對（inkstone/ISEP#150）
|
||||
#
|
||||
# 不動 ~/.claude：把 inkstone marketplace 與 isep 安裝紀錄複製到 mktemp 的隔離 HOME，
|
||||
# 分別放「有 path」「沒有 path」兩份 settings.json，用真的可執行檔跑 doctor。
|
||||
# 會打網路：只有 Claude Code 自己可能匿名讀 git.uncle6.me（Gitea），不碰 GitHub、不寫任何遠端。
|
||||
#
|
||||
# 期望（09-13 在 CLI 2.1.220／Desktop 2.1.266 上實測過的行為）：
|
||||
# 沒有 path ⇒ 兩個都 ✅，離開碼 0 （真陰性）
|
||||
# 有 path、Desktop 2.1.266 ⇒ ❌ 並點名 path （真陽性）
|
||||
# 有 path、CLI 2.1.220 ⇒ ✅，不因設定長相被判 ❌ （舊版 doctor 的假陽性）
|
||||
# 版本不是這兩個時，該版本那一格印 SKIP（行為可能不同，不假裝驗過）。
|
||||
set -u
|
||||
HERE="$(cd "$(dirname "$0")" && pwd)"
|
||||
R="$HOME/.claude/plugins"
|
||||
[ -d "$R/cache/inkstone" ] && [ -d "$R/marketplaces/inkstone" ] || { echo "SKIP：這台沒有安裝 isep@inkstone，無從複製"; exit 0; }
|
||||
|
||||
CLI=$(command -v claude || true)
|
||||
DESK=$(ls -d "$HOME/Library/Application Support/Claude/claude-code/"*/claude.app/Contents/MacOS/claude 2>/dev/null \
|
||||
| python3 -c 'import sys,re;L=[l.strip() for l in sys.stdin if l.strip()];k=lambda p:tuple(int(x) for x in re.search(r"/claude-code/([0-9.]+)/",p).group(1).split(".") if x);print(sorted(L,key=k)[-1] if L else "")')
|
||||
BINS=""; [ -n "$CLI" ] && BINS="CLI=$CLI"; [ -n "$DESK" ] && BINS="${BINS:+$BINS:}Desktop=$DESK"
|
||||
[ -n "$BINS" ] || { echo "SKIP：找不到任何 Claude Code"; exit 0; }
|
||||
vcli=$([ -n "$CLI" ] && "$CLI" --version | awk '{print $1}'); vdesk=$([ -n "$DESK" ] && "$DESK" --version | awk '{print $1}')
|
||||
echo "CLI=${CLI:-無} ${vcli:-}｜Desktop=${DESK:-無} ${vdesk:-}"
|
||||
|
||||
T=$(mktemp -d); trap 'rm -rf "$T"' EXIT
|
||||
C="$T/home/.claude"; mkdir -p "$C/plugins/cache" "$C/plugins/marketplaces"
|
||||
cp -R "$R/cache/inkstone" "$C/plugins/cache/" && cp -R "$R/marketplaces/inkstone" "$C/plugins/marketplaces/"
|
||||
python3 - "$R" "$C" <<'EOF'
|
||||
import json, sys
|
||||
R, C = sys.argv[1], sys.argv[2]
|
||||
km = json.load(open(R + "/known_marketplaces.json"))
|
||||
json.dump({"inkstone": json.loads(json.dumps(km["inkstone"]).replace(R, C + "/plugins"))}, open(C + "/plugins/known_marketplaces.json", "w"))
|
||||
ip = json.load(open(R + "/installed_plugins.json"))
|
||||
ip["plugins"] = {"isep@inkstone": ip["plugins"]["isep@inkstone"]}
|
||||
json.dump(json.loads(json.dumps(ip).replace(R, C + "/plugins")), open(C + "/plugins/installed_plugins.json", "w"))
|
||||
src = {"source": "git", "url": "https://git.uncle6.me/inkstone/ISEP.git"}
|
||||
json.dump({"enabledPlugins": {"isep@inkstone": True}, "extraKnownMarketplaces": {"inkstone": {"source": src}}}, open(C + "/settings.nopath.json", "w"))
|
||||
src["path"] = "/Users/youlinhsieh/Documents/tech_projects/ISEP"
|
||||
json.dump({"enabledPlugins": {"isep@inkstone": True}, "extraKnownMarketplaces": {"inkstone": {"source": src}}}, open(C + "/settings.path.json", "w"))
|
||||
EOF
|
||||
cp -R "$C" "$T/pristine"
|
||||
|
||||
pass=0; fail=0; skip=0
|
||||
doctor() { # settings 變體
|
||||
rm -rf "$C" && cp -R "$T/pristine" "$C" && cp "$C/settings.$1.json" "$C/settings.json"
|
||||
OUT=$(cd "$T" && env -u CLAUDE_CODE_CHILD_SESSION HOME="$T/home" ISEP_DOCTOR_CLAUDE_BINS="$BINS" python3 "$HERE/isep-doctor" 2>&1); CODE=$?
|
||||
echo "── settings=$1（exit=$CODE）"; printf '%s\n' "$OUT" | sed 's/^/ /'
|
||||
}
|
||||
has() { printf '%s' "$OUT" | grep -q -- "$1"; }
|
||||
judge() { if eval "$2"; then pass=$((pass+1)); echo "ok $1"; else fail=$((fail+1)); echo "FAIL $1"; fi; }
|
||||
|
||||
doctor nopath
|
||||
judge "真陰性：沒有 path → 離開碼 0、沒有 ❌" '[ "$CODE" = 0 ] && ! has "❌"'
|
||||
|
||||
doctor path
|
||||
if [ "$vdesk" = 2.1.266 ]; then
|
||||
judge "真陽性：Desktop 2.1.266 有 path → ❌ 並點名 path、離開碼 1" '[ "$CODE" = 1 ] && has "❌ Desktop 2.1.266" && has "多了 path"'
|
||||
else skip=$((skip+1)); echo "SKIP 真陽性：Desktop 是 ${vdesk:-無}，不是 2.1.266"; fi
|
||||
if [ "$vcli" = 2.1.220 ]; then
|
||||
judge "假陽性：CLI 2.1.220 有 path 但實際載入 → ✅" 'has "✅ CLI 2.1.220"'
|
||||
else skip=$((skip+1)); echo "SKIP 假陽性：CLI 是 ${vcli:-無}，不是 2.1.220"; fi
|
||||
|
||||
echo "pass=$pass fail=$fail skip=$skip"; [ "$fail" = 0 ]
|
||||
+80
-28
@@ -1,43 +1,95 @@
|
||||
#!/usr/bin/env bash
|
||||
# 迴歸測試：scripts/isep-doctor（inkstone/ISEP#150）
|
||||
# 迴歸測試：scripts/isep-doctor（inkstone/ISEP#150）——全離線
|
||||
# 用假的 claude 可執行檔（shell 腳本）代替真的 CLI／Desktop，走的是 doctor 真正的 subprocess 那條路。
|
||||
# 真的 Claude Code 版本的實測在 scripts/test-isep-doctor-live.sh。
|
||||
set -u
|
||||
HERE="$(cd "$(dirname "$0")" && pwd)"
|
||||
T=$(mktemp -d); trap 'rm -rf "$T"' EXIT
|
||||
pass=0; fail=0
|
||||
check() { # name expected_exit grep_pattern
|
||||
local out code; out=$(ISEP_DOCTOR_CLAUDE_HOME="$T/home" ISEP_DOCTOR_PLUGIN_LIST_JSON="$T/list.json" python3 "$HERE/isep-doctor" 2>&1); code=$?
|
||||
if [ "$code" = "$2" ] && printf '%s' "$out" | grep -q -- "$3"; then pass=$((pass+1)); echo "ok $1"
|
||||
else fail=$((fail+1)); echo "FAIL $1 (exit=$code)"; printf '%s\n' "$out" | sed 's/^/ /'; fi
|
||||
URL=https://git.uncle6.me/inkstone/ISEP.git
|
||||
|
||||
mkfake() { # 路徑 版本 plugin-list 輸出（原樣印出）
|
||||
mkdir -p "$(dirname "$1")"
|
||||
printf '%s' "$3" > "$1.out"
|
||||
cat > "$1" <<EOF
|
||||
#!/bin/sh
|
||||
if [ "\$1" = "--version" ]; then echo "$2 (Claude Code)"; exit 0; fi
|
||||
cat "$1.out"
|
||||
EOF
|
||||
chmod +x "$1"
|
||||
}
|
||||
run() { OUT=$(ISEP_DOCTOR_CLAUDE_HOME="$T/home" python3 "$HERE/isep-doctor" 2>&1); CODE=$?; }
|
||||
ok() { pass=$((pass+1)); echo "ok $1"; }
|
||||
bad() { fail=$((fail+1)); echo "FAIL $1 (exit=$CODE)"; printf '%s\n' "$OUT" | sed 's/^/ /'; }
|
||||
expect() { # 名稱 離開碼 要有的樣式（| 分隔，可空） 不准有的樣式（可空）
|
||||
local p miss=""
|
||||
[ "$CODE" = "$2" ] || miss="exit"
|
||||
local IFS='|'
|
||||
for p in $3; do printf '%s' "$OUT" | grep -q -- "$p" || miss="$miss 缺[$p]"; done
|
||||
if [ -n "${4:-}" ] && printf '%s' "$OUT" | grep -q -- "$4"; then miss="$miss 多了[$4]"; fi
|
||||
[ -z "$miss" ] && ok "$1" || { bad "$1 →$miss"; }
|
||||
}
|
||||
|
||||
mkdir -p "$T/home/plugins"
|
||||
echo '{"inkstone":{"source":{"source":"git","url":"https://git.uncle6.me/inkstone/ISEP.git"}}}' > "$T/home/plugins/known_marketplaces.json"
|
||||
echo "{\"inkstone\":{\"source\":{\"source\":\"git\",\"url\":\"$URL\"}}}" > "$T/home/plugins/known_marketplaces.json"
|
||||
SET_PATH="{\"extraKnownMarketplaces\":{\"inkstone\":{\"source\":{\"source\":\"git\",\"url\":\"$URL\",\"path\":\"/Users/x/ISEP\"}}},\"model\":\"keep\"}"
|
||||
SET_CLEAN="{\"extraKnownMarketplaces\":{\"inkstone\":{\"source\":{\"source\":\"git\",\"url\":\"$URL\"}}}}"
|
||||
LOADED='[{"id":"isep@inkstone","version":"0.30.1","enabled":true}]'
|
||||
NOTFOUND='[{"id":"isep@inkstone","version":"0.30.1","enabled":true,"errors":["Marketplace inkstone not found"]}]'
|
||||
|
||||
# 1. 09-13 實況：settings 多了 path、plugin list 報 Marketplace not found → 1，點名 path
|
||||
echo '{"extraKnownMarketplaces":{"inkstone":{"source":{"source":"git","url":"https://git.uncle6.me/inkstone/ISEP.git","path":"/Users/x/ISEP"}}}}' > "$T/home/settings.json"
|
||||
echo '[{"id":"isep@inkstone","version":"0.30.1","enabled":true,"errors":["Marketplace inkstone not found"]}]' > "$T/list.json"
|
||||
check "path 造成載入失敗" 1 "多了 path"
|
||||
# ① 假陽性（c6991）：設定有 path，但這個 Claude Code 自己回報載入正常 → ✅、不准點名 path
|
||||
echo "$SET_PATH" > "$T/home/settings.json"
|
||||
mkfake "$T/b/cli" 2.1.220 "$LOADED"
|
||||
export ISEP_DOCTOR_CLAUDE_BINS="CLI=$T/b/cli"; run
|
||||
expect "① 有 path 但實際載入（2.1.220 形狀）→ ✅ 不點名 path" 0 "✅ CLI 2.1.220" "path"
|
||||
|
||||
# 2. 修好後：沒有 path、沒有 errors → 0
|
||||
echo '{"extraKnownMarketplaces":{"inkstone":{"source":{"source":"git","url":"https://git.uncle6.me/inkstone/ISEP.git"}}}}' > "$T/home/settings.json"
|
||||
echo '[{"id":"isep@inkstone","version":"0.30.1","enabled":true}]' > "$T/list.json"
|
||||
check "正常載入" 0 "已載入"
|
||||
# ② 真陽性（c6990）：同一份設定，CLI 載得進、Desktop 載不進 → 1；兩邊各講各的；點名 path；給修法
|
||||
mkfake "$T/b/desk" 2.1.266 "$NOTFOUND"
|
||||
export ISEP_DOCTOR_CLAUDE_BINS="CLI=$T/b/cli:Desktop=$T/b/desk"; run
|
||||
expect "② CLI 載得進、Desktop 載不進 → 1，逐一講、點名 path" 1 "✅ CLI 2.1.220|❌ Desktop 2.1.266|Marketplace inkstone not found|多了 path|^ python3 "
|
||||
printf '%s' "$OUT" | grep -q "CLI 與 Desktop 都一樣" && bad "② 不准再說 CLI 與 Desktop 都一樣" || ok "② 沒有把整台機器講成同一個結論"
|
||||
|
||||
# 3. 別的原因失敗（沒有多餘欄位）→ 1，照實轉述 Claude Code 的錯
|
||||
echo '[{"id":"isep@inkstone","version":"0.30.1","enabled":true,"errors":["Plugin directory missing"]}]' > "$T/list.json"
|
||||
check "其他錯誤照實轉述" 1 "Plugin directory missing"
|
||||
# ③ 真陰性：拿掉 path，兩邊都載入 → 0
|
||||
echo "$SET_CLEAN" > "$T/home/settings.json"
|
||||
mkfake "$T/b/desk" 2.1.266 "$LOADED"; run
|
||||
expect "③ 沒有 path、兩邊都載入 → 0" 0 "✅ CLI 2.1.220|✅ Desktop 2.1.266" "❌"
|
||||
|
||||
# 4. 根本沒裝 → 1
|
||||
echo '[]' > "$T/list.json"
|
||||
check "沒安裝" 1 "沒有安裝"
|
||||
# ④ 別的原因失敗（設定沒有多餘欄位）→ 1，照實轉述，不編原因、不給 path 修法
|
||||
mkfake "$T/b/desk" 2.1.266 '[{"id":"isep@inkstone","version":"0.30.1","enabled":true,"errors":["Plugin directory missing"]}]'; run
|
||||
expect "④ 其他錯誤照實轉述、不編原因" 1 "❌ Desktop|Plugin directory missing" "修法（一行"
|
||||
|
||||
# 5. 修法那一行真的修得好（在假 HOME 上執行印出來的指令）
|
||||
echo '{"extraKnownMarketplaces":{"inkstone":{"source":{"source":"git","url":"https://git.uncle6.me/inkstone/ISEP.git","path":"/Users/x/ISEP"}}},"model":"keep"}' > "$T/home/settings.json"
|
||||
echo '[{"id":"isep@inkstone","version":"0.30.1","enabled":true,"errors":["Marketplace inkstone not found"]}]' > "$T/list.json"
|
||||
fixline=$(ISEP_DOCTOR_CLAUDE_HOME="$T/home" ISEP_DOCTOR_PLUGIN_LIST_JSON="$T/list.json" python3 "$HERE/isep-doctor" | grep '^ python3 ' | sed 's/^ //')
|
||||
# ⑤ 沒安裝 → 1
|
||||
mkfake "$T/b/desk" 2.1.266 '[]'; run
|
||||
expect "⑤ 沒安裝 → 1" 1 "❌ Desktop 2.1.266：isep@inkstone 沒有安裝"
|
||||
|
||||
# ⑥ 查不了（輸出不是 JSON）＋另一個正常 → 2，◐，不准講成 ❌ 或 ✅
|
||||
mkfake "$T/b/desk" 2.1.266 'Error: something broke'; run
|
||||
expect "⑥ 一個查不了、一個正常 → 2" 2 "◐ Desktop|讀不到不等於沒載入|✅ CLI" "❌"
|
||||
|
||||
# ⑦ 一個 Claude Code 都找不到 → 2
|
||||
export ISEP_DOCTOR_CLAUDE_BINS=""; run
|
||||
expect "⑦ 找不到任何 Claude Code → 2" 2 "◐ 查不了"
|
||||
|
||||
# ⑧ 修法那一行真的修得好（在假 HOME 上原封不動執行印給 leo 的那一行）
|
||||
echo "$SET_PATH" > "$T/home/settings.json"
|
||||
mkfake "$T/b/desk" 2.1.266 "$NOTFOUND"
|
||||
export ISEP_DOCTOR_CLAUDE_BINS="Desktop=$T/b/desk"; run
|
||||
fixline=$(printf '%s\n' "$OUT" | grep '^ python3 ' | sed 's/^ //')
|
||||
mkdir -p "$T/fake/.claude" && cp "$T/home/settings.json" "$T/fake/.claude/settings.json"
|
||||
HOME="$T/fake" bash -c "$fixline" # 原封不動執行印給 leo 的那一行
|
||||
if python3 -c "import json,sys;d=json.load(open('$T/fake/.claude/settings.json'));s=d['extraKnownMarketplaces']['inkstone']['source'];sys.exit(0 if 'path' not in s and d['model']=='keep' and s['url'].endswith('ISEP.git') else 1)"; then
|
||||
pass=$((pass+1)); echo "ok 修法一行拿掉 path、其他設定不動"
|
||||
else fail=$((fail+1)); echo "FAIL 修法一行"; cat "$T/home/settings.json"; fi
|
||||
HOME="$T/fake" bash -c "$fixline"
|
||||
if [ -n "$fixline" ] && python3 -c "import json,sys;d=json.load(open('$T/fake/.claude/settings.json'));s=d['extraKnownMarketplaces']['inkstone']['source'];sys.exit(0 if 'path' not in s and d['model']=='keep' and s['url'].endswith('ISEP.git') else 1)"; then
|
||||
ok "⑧ 修法一行拿掉 path、其他設定不動"
|
||||
else fail=$((fail+1)); echo "FAIL ⑧ 修法一行"; cat "$T/fake/.claude/settings.json"; fi
|
||||
# ⑧b 修完再問一次（Desktop 改回報正常）→ 0：出路走得通
|
||||
cp "$T/fake/.claude/settings.json" "$T/home/settings.json"; mkfake "$T/b/desk" 2.1.266 "$LOADED"; run
|
||||
expect "⑧b 照修法修完再跑 → ✅" 0 "✅ Desktop" "多了 path"
|
||||
|
||||
# ⑨ 自動尋找：Desktop 取數字上最新的那一份（2.1.99 < 2.1.266，字串排序會選錯）
|
||||
unset ISEP_DOCTOR_CLAUDE_BINS
|
||||
D="$T/h9/Library/Application Support/Claude/claude-code"
|
||||
mkfake "$D/2.1.99/claude.app/Contents/MacOS/claude" 2.1.99 "$NOTFOUND"
|
||||
mkfake "$D/2.1.266/claude.app/Contents/MacOS/claude" 2.1.266 "$LOADED"
|
||||
OUT=$(HOME="$T/h9" PATH="/usr/bin:/bin" ISEP_DOCTOR_CLAUDE_HOME="$T/home" /usr/bin/env python3 "$HERE/isep-doctor" 2>&1); CODE=$?
|
||||
expect "⑨ Desktop 取最新版本（數字排序）" 0 "✅ Desktop 2.1.266" "2.1.99"
|
||||
|
||||
echo "pass=$pass fail=$fail"; [ "$fail" = 0 ]
|
||||
|
||||
Reference in New Issue
Block a user